The crankshaft adopts single cantilever support structure, which featureexcellent installation, detachment and maintenance. Main bearingsapply precise columnroller bearings, and special-made needle bearings with the superior loading capacity are used on both ends of the connecting rod. No bearing bush is applied to the whole machine, low friction consumption, strong ability of resistingtough conditions.
ADEKOM unique inertia moment balance design and workmanship guarantee extremely low vibration on the whole machine.
The inhalation unit adopts ADEKOM patented techniques- impedance compound suction muffler and low-side inlet disposition. Low suction temperature and noise.
High efficiency, energy conservation and long working life gas valve. ADEKOM "polygon cylindrical straight-flow valve"adopted at the first stage and second stage; highly efficient combination ring valve, which is researched and developed by ADEKOM after many years operation test and optimization, applied to the third stage and fourth stage.
ADEKOM particular oil controlling design has realized extremelylow oil consumption.
Drainage system employ a masterly combination of Adekom patent large size air-controlling drain valve, solenoid discharge valve, whirlwind air& water separator and electrical timing controller to ensure a swift, thorough and reliable sewage disposal.
Redundancy control technology ensuring an unloading start at zero pressure. The diaphragm valve set at the suction port will close air intake within several seconds when the machine starts; all valves for releasing air and pollution will open when machine is at the state of on/off to guarantee zero pressure inside.
Two flow adjusting modes are available: electrical adjustment and pneumatic adjustment, which is convenient for users to choose.
Modular design makes it accessible to consist multi-compressor set, toredouble air output, and users can select easily.
High Pressure Series Specifications
Head model | Model | Discharge capacity(Nm³/min) | Discharge pressure(Mpa) | Compression stage | Motor output (kW) | Speed (r.p.m) | Weight (KG) | Dimensions(mm) |
K80SH | 80SH-15150 | 0.75 | 15.0 | 4 | 15 | 630 | 680 | 1678×1035×998 |
K80SH | 80SH-15250 | 0.75 | 25.0 | 630 | 1678×1035×998 | |||
K81SH | 81SH-15350 | 0.7 | 35.0 | 630 | 1700×1040×1100 | |||
K2-80SH | 2-80SH-15150 | 1.5 | 15.0 | 4 | 15×2 | 630 | 1550 | 4030×1150×1250 |
K2-80SH | 2-80SH-15250 | 1.5 | 25.0 | 630 | 4030×1150×1250 | |||
K2-81SH | 2-81SH-15350 | 1.3 | 35.0 | 630 | 4030×1150×1250 |